Norbar 诺霸新浪微博
找到您国家内的代理商

您所在位置的诺霸网站



站点检索

  Search

检索

 
  

Catalogues & Handbooks

  

Translate This Page

  

Standards

诺霸系列扭矩产品全部在诺霸位于英国Banbury的工厂生产制造。该工厂通过了ISO 9001体系认证,确保诺霸能够提供全球同步的优质产品和服务。

BSI, UKAS Standards
                             0256

  

Ask the 'Voice of Torque'

Ask the Voice of Torque

  

 Norbar »  Products

Products

适用于诺霸仪器产品的辅助设备。

如,当订购“静态”或“环状”传感器时, 需要订购相关的连接线。


串行数据线套件
Part No. 60248

此数据线套装适用于诺霸Pro-Test,TST及TTT设备与绝大多数电脑及RS232打印机的连接。

套装内包括以下数据线:
 
·9路“D”型插座与9路“D”型插座连接线,空调制解调器。
·25路“D”型插头与9路“D”型插座连接线。
·25针转换器,插座对插座。
·25针转换器,插头对插头。


电子传感器系统(pre 94)传感器线
Part No. 51067.225

用于连接pre1994 ETS与5路电闸盒。
10路连接线,用于诺霸旋转式传感器
Part No. 60216.200

供诺霸Pro-Log、TST及TTT设备使用。
无连接头传感器10路线
Part No. 60224.200

适用于非诺霸设备与诺霸旋转传感器连接用。
无连接头传感器6路线
Part No. 60225.200

适用于非诺霸设备与诺霸6路连接器连接用。
传感器线用于电子传感器系统及5路开关部件
Part No. 60152

传感器线用于诺霸“ETS”显示设备及5路开关部件。
小型传感器线
Part No. 60153

诺霸小型传感器线。
挤压耦合剂,蓝色
Part No. 38216.BLU

挤压耦合剂可连接两个诺霸电子设备。如一个“ETS”显示器与一个“10频选择部件”。
10 Channel Selection Unit
Part No. 60165

The Ten Channel Selection Unit is used in conjunction with a modified ETS LD or DTS LTD, to expand the number of limits (upper and lower) from one up to a maximum of ten.
12V DC Power Supply
Part No. 60188

Power supply for use with Pro-Test Instruments, when powering from a 12V DC vehicle battery.
5 Way Switch Unit
Part No. 60163

Where a number of transducers are in constant use, it can be inconvenient to keep changing transducer leads and amplifiers. The 5 Way Switch Unit overcomes this problem.
Battery Power Unit
Part No. 60166

The Battery Power Unit is a ruggedly built re-chargeable unit that allows complete portability of the ETS or DTS system. The unit can power up to two display instruments or one display and one Norbar Data Printer. TWA display units for use with Battery Power Unit are available to special order.
Data Printer
Part No. 60164

The Norbar Data Printer is a serial (RS-232-C), dot matrix, impact ribbon printer that conforms to current EC Directives and safety standards.
Print Inhibit Controller
Part No. 60167

The Print Inhibit Controller is a remote, hand held device for controlling the RS-232-C output from all of Norbar's CE marked display instruments. The Controller allows 3 possible modes of operation: 1. RS-232-C data output as normal, so giving data on each request. 2. Completely disabled RS-232-C data output. 3. RS-232-C output on the next request, all subsequent requests inhibited.

  非标设计

  产品目录及操作手册 

  经典应用

  

  Copyright © Norbar Torque Tools Ltd. All Rights Reserved
 经销商登陆     服务条款     隐私声明   
诺霸精密机械(上海)有限公司   地址: 上海市宜山路1618号E栋5楼
TEL:021-61450368 FAX:021-61450369 Email:sales@norbar.com.cn