Norbar 诺霸新浪微博
找到您国家内的代理商

您所在位置的诺霸网站



站点检索

  Search

检索

 
  

Catalogues & Handbooks

  

Translate This Page

  

Standards

诺霸系列扭矩产品全部在诺霸位于英国Banbury的工厂生产制造。该工厂通过了ISO 9001体系认证,确保诺霸能够提供全球同步的优质产品和服务。

BSI, UKAS Standards
                             0256

  

Ask the 'Voice of Torque'

Ask the Voice of Torque

  

 Norbar »  Products

Products

PT52 Pneumatic MultiplierPT52设计是目前市场上同型中最轻快的气动扳手之一。本体直径52mm的齿轮箱设计,在操作时扳手本身可以保持平衡且重量很轻。可与螺丝保持很好的接触以达到锁紧的扭矩。

三种型号选择,分别为失速型、内部控制型与外部控制型。

  • 速度快——1000N.m的款式有125 rpm的空转转速可快速拆卸螺丝。
  • 重量轻——单项操作型重量只有3.8kg。
  • 低噪音——在操作时声音低于85dB(A)。
  • 非冲击式——非冲击式设计使用上安全且不会使工具损坏。
  • 驱动方头可以很轻易的快速的更换。
  • 起动缓慢的设计可以使反作用力臂很安全准确的座落在被锁螺丝附近。
  • 为安全起见,齿轮箱可以从握把的地方,自行的旋转不会造成反作用力传到使用者。 
  • 提供1”驱动方头,料号为18545。

    


Pneumatic Mulitplier, 1000 N.m, Bi-Directional, Stall, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18040B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bols


Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 1000 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 1000 N.m, Forward only, Stall, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18040F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts.


Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041.B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18039B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts.


Pneumatic Multiplier, 600 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 600 N.m, Forward only, Stall, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18039F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts.


Pneumatic Multiplier, 600 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041.F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042.B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 1000 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042.F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.


Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18043B06

    The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on the overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.


Pneumatic Multiplier, 600 N.m, Forward only, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18043F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.


Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18044B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.


Pneumatic Multiplier, 1000 N.m, Forward only, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18044F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.


Pneumatic Multiplier, 600 N.m, Bi-Directional, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18045B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.


Pneumatic Multiplier, 600 N.m, Forward only, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18045F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.


Pneumatic Multiplier, 1000 N.m, Bi-Directional, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18046B06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.


Pneumatic Multiplier, 1000 N.m, Forward only, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18046F06

The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.


  非标设计

  产品目录及操作手册 

  经典应用

  

  Copyright © Norbar Torque Tools Ltd. All Rights Reserved
 经销商登陆     服务条款     隐私声明   
诺霸精密机械(上海)有限公司   地址: 上海市宜山路1618号E栋5楼
TEL:021-61450368 FAX:021-61450369 Email:sales@norbar.com.cn